Internet Control Message Protocol

Internet Control Message Protocol is part of the Internet Protocol Suite as defined in RFC 792. ICMP messages are typically generated in response to errors in IP datagrams (as specified in RFC 1122) or for diagnostic or routing purposes.

ICMP messages are constructed at the IP layer, usually from a normal IP datagram that has generated an ICMP response. IP encapsulates the appropriate ICMP message with a new IP header (to get the ICMP message back to the original sending host) and transmits the resulting datagram in the usual manner.

For example, every machine (such as an intermediate router) that forwards an IP datagram has to decrement the time to live (TTL) field of the IP header by one; if the TTL reaches 0, an ICMP Time to live exceeded in transit message is sent to the source of the datagram.

Each ICMP message is encapsulated directly within a single IP datagram, and thus, like UDP, ICMP is unreliable.

Although ICMP messages are contained within standard IP datagrams, ICMP messages are usually processed as a special case, distinguished from normal IP processing, rather than processed as a normal sub-protocol of IP. In many cases, it is necessary to inspect the contents of the ICMP message and deliver the appropriate error message to the application that generated the original IP packet, the one that prompted the sending of the ICMP message.

Many commonly-used network utilities are based on ICMP messages. The traceroute command is implemented by transmitting UDP datagrams with specially set IP TTL header fields, and looking for ICMP Time to live exceeded in transit (above) and "Destination unreachable" messages generated in response. The related ping utility is implemented using the ICMP "Echo request" and "Echo reply" messages.